It is mainly used for heating multi-branch Manifold pipe(Floor heating water distributor) hydroforming processing and forming in connection pipe of water collector, also used for air conditioning system backwater and water supply branch pipe

The utility model discloses a kind of hydroforming of stainless steel floor heating water segregator(Mainfold), including inlet pipe, casing, pipe, manifold and Siamese internal high pressure forming, described in the inlet pipe connected to the enclosure water segregator, and from left to right in turn set between inlet pipe and shell have on-off ball valves and filters, described in the return pipe and shell Siamese connections, and the shell at the other end connected with pipes, described the shell outer wall installation screen, described in the manifold electromagnetic valves are respectively fixed on both ends up and down and the water pipe connector, electrical connections, and the electromagnetic valve and controller described in the water pipe connection head external mix water runs in hot mouth,The lower end of the collector is fixed with a connection head of the collector, and a temperature sensor is installed inside the connection head of the collector. The other end of the distributor and the collector is installed with an exhaust and drainage valve. The internal high pressure forming(hydechnology of the utility model makes the mixing water exchange outlet of the connecting head of the distributing water pipe connected with the mixing water pipe,it's control the warm temperature in the interior of each roo.